Products

JSC "Stoilensky (Mining and Beneficiation Plant)" (NLMK Group) is one of the three leading mining companies in Russia. It develops one of the largest deposits of the Kursk Magnetic Anomaly (KMA). Stoilensky’s main products are iron ore concentrate and sinter ore.

Core production

Sinter ore concentrate (ore 66%) and sintering ore (ore 55%) are the key components in pig-iron and BOF steel production process.

STO 00186826-026-2015 sinter ore concentrate

Indicator Standard value
Iron mass fraction, % 66,3
Permissible deviation on iron mass fraction, % -0,3
Moisture mass fraction, % 10,0
Permissible deviation on moisture mass fraction, % +0,5
Silicon dioxide mass fraction, % 6,9
Permissible deviation on silicon dioxide mass fraction, % ±0,5

Note: Value above the upper limit for iron mass fraction is not a rejection criterion. Values below the lower limit for silicon dioxide and moisture mass fraction are not a rejection criterion.

STO 00186826-029-2015 sinter ore

Indicator Standard value
Iron mass fraction, % 52,0
Permissible deviation on iron mass fraction, % -1,0
Moisture mass fraction, % 9,0
Mass fraction of +10 mm particles, % 9.0 max
Silicon dioxide mass fraction, % 11,0
Permissible deviation on silicon dioxide mass fraction, % -2,0 / +1,0
Aluminium oxide (AL2O3) mass fraction, % 4.0max

Note: There is no upper limit on iron mass fraction and lower limit on aluminium oxide content. Content of moisture and aluminium oxide are not rejection criteria.

STO 00186826-033-2013 blast furnace (raw) ore

Indicator Standard value
Total iron mass fraction, % min. 30
Total FeO fraction, % min. 6.5
SiO2 mass fraction, % min. 30
Moisture mass fraction, % max. 3,0
Particle size, mm 20-60
Mass fraction of <20 mm particles, % max. 10
Mass fraction of 20-60 mm particles, % min. 80


STO 00186826-034-2013 Production of pellets

Iron mass fraction in pellets, % ≥ 64.6 %
Commercial pellet particle size 9-16 mm
Compression strength ≥ 250 kg/pellet
Impact strength index > +6.3 mm ≥ 95 mass %
Attrition resistance index < -0.5 mm <5 mass%
Mass fraction of 5 mm particles <3 %


  

Non-metal products

STO 00186826-547-2015 dense rock crushed stone

Indicator Standard value
Content of plate- and needle-shaped grains, mass percent, max. 50
Crushability grade 1200
Attrition grade И1
Content of hazardous rock grains, percent, max. 5
Freeze-thaw grade, min. F50
Content of flour and clay particles, percent, max. 2
Content of lumpy clay, percent, max. 0,25
Crushed rock structural stability against any type of breakage, weight loss on breakage, percent, max. 3

Note: There are no regulations applicable to chemical composition of crushed rock.

STO 00186826-546-2015 crushed rock and sand mix

Indicator Standard value
Crushability grade, min. 1200
Freeze-thaw grade, min. F25
Content of flour and clay particles, percent, max. 25
Structural stability against any type of breakage, weight loss on breakage, percent, max. 3

Note: There are no regulations applicable to chemical composition of crushed rock and sand mix.

STO 00186826-025-2015 natural sand

Indicator Standard value
Sand group Fine, very fine
Sand grade II
Fineness modulus 1,0-2,0
Sieve mesh 63 residue, percent, max. 30
Content of lumpy clay, percent, max. 0,5
Content of particles over 10 mm, percent, max. 1,0
Content of particles over 5 mm, percent, max. 10
Content of particles over 0.16 mm, percent, max. 20
Content of flour and clay particles, percent, max. 5